Specialty Paints and Primers

BEHR® Multi-Surface Roof Paint

BEHR® Multi-Surface Roof Paint

A premium quality, durable, 100% acrylic latex flat finish. This coating is mildew and algae resistant and will not discolor or yellow when exposed to typical high roof temperatures. It has excellent adhesion to various types of roofing materials and is tintable to match a variety of custom colors.

Tech Data Sheet HERE

  • Deep Base No. 66 - MSDS

Available In

  • White Reflective No. 65 - MSDS

WHERE TO USE

New or old Unglazed Tile, Masonry Shingle, Anchored Gravel, Aluminum/Metal Materials, Composite Sheet, Asphalt Shingles, Concrete or Cement Block, Urethane Foam, Slate or Wood Shake Roofs. This product is intended to brighten roofs and reflect heat. Not intended to waterproof or repair roof leaks.

PREPARATION

Proper surface preparation is required

  • Replace brittle or cracked shingles. Clean all roof surfaces.
  • Previously coated surfaces should be wire brushed or scraped to remove all loose coating.
  • Remove mildew with a mildew stain removing product.
  • On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM® NO. 991 Concrete & Masonry Cleaner & Etcher to prepare surface.
  • If applying on wood shakes, clean with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner. Follow directions on product labels.
  • Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Prime all metal, asphalt and wood surfaces with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer. Follow directions on product label.

APPLICATION

  • DO NOT THIN.
  • When working with more than one can of the same product, inter-mix to ensure color uniformity. Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 50-90˚F (10-32˚C). Do not use if rain or heavy dew is expected within 24 hours.
  • Do not apply in direct sunlight.
  • All roof surfaces must be dry.
  • Apply starting at the top of the roof and working down, using a high quality 1" nap roller, nylon/polyester brush or high quality airless sprayer (.015"-.017" sprayer tip). Always maintain a wet edge to avoid lap marks.
  • A second coat is optional for improved hide and durability.
  • DRY TIME

  • Longer dry time required in cooler temperatures and higher humidity.
  • DISPOSAL

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product contact your household refuse collection service.
  • WARNING!

    If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

    WARNING! Sanding or scraping pressure treated lumber may be hazardous; wear appropriate protection.

    To accent siding, trim, and other exterior areas of your home, use Behr Premium Plus Exterior Semi-Gloss Enamel. This radiant sheen is perfect for use in any climate and is mildew resistant. Look for product safety information on BehrPro.com.